Dahua S8610 Switch

Popis produktu:

3 layer managed enterprise-level core switch
High-performance switch chip, large cache, and no video lags
Comply with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, and IEEE802.3x standards
Supports STP, RSTP, and MSTP spanning tree protocol (STP)
Supports manual aggregation and static LACP protocol aggregation
Supports Layer 2 features including VLAN, IGMP Snooping, LLDP, ACL, QoS, etc.
Supports IPv4, IPv6 routing
Supports TRILL, EVB, FCoE and MDC technologies required for cloud data centering
Supports Web, SNMP and CLI management


High port density 10G line cards
Fully compliant with 40GE Ethernet standards
Support virtualization technologies
Hardware level encryption technology MACsec
High-performance IPv4/IPv6 service capabilities
Comprehensive security control policies
Support hot swapping for all components
Advanced CLOS multistage and multi-plane switching architecture,


Hardware Feature

Total Number of Slots

13

Number of Line Card Slots

10

Number of MPU Slots

2

Switching fabric module Slots

1

Hot Swapping

Yes

Console Port

1 × RJ45 console port
1 × Micro-USB port

Power Supply

Not included

Min: 3
Max: 6

100-240V AC 50-60 Hz (Internal)

Power Consumption

Idling: 30W
Full load: 2430W

Operating Temperature

0°C to 45°C (32°F to 113°F)

Operating Humidity

5%RH–95%RH

Storage Temperature

–40°C to 70°C (–40°F to 158°F)

Redundancy

Redundant MPUs, power modules, and fan trays

Performance

Layer

Layer 3

Managed

Yes

Switching Capacity

256 Tbps

Packet Forwarding Rate

8400 Mpps

Jumbo Frame

10000 Byte

Features

Ethernet

IEEE 802.1P(CoS priority)
IEEE 802.1Q
IEEE 802.1ad (QinQ), selective QinQ and Vlan mapping
DLDP
LLDP
Static MAC configuration
Limited MAC learning
Port mirroring and traffic mirroring
Port aggregation, port isolation, and port mirroring
IEEE 802.1D (STP)/802.1w (RSTP)/802.1s (MSTP)
IEEE 802.3ad (dynamic link aggregation), static port aggregation, and multi-chassis link aggregation
RRPP (Rapid Ring Protection Protocol)
Jumbo frame
SuperVLAN
PVLAN
Multicast VLAN+
MCE

Routing

Static routing, RIP, OSPF, IS-IS, and BGP4
IPv4/IPv6 ECMP
VRRP
IPv4/IPv6 Policy-based routing
IPv4/IPv6 Routing policy
IPv6 static routing, RIPng, OSPFv3, IS-ISv6, and BGP4+
VRRPv3
Pingv6, Tenetv6, FTPv6, TFTPv6, DNSv6, and ICMPv6

DHCP

DHCP Client
DHCP Snooping
DHCP Snooping option82
DHCP Relay
DHCP Server
DHCP auto-config

IP routing

12K IPV4 routing entries
Static routing
RIPv1/v2 and RIPng
OSPFv1/v2/v3
BGP and BGP4+ for IPv6
IS-IS
VRRP/VRRPv3

Mirroring

Flow mirroring
N:4 port mirroring
Local port mirroring and remote port mirroring

Multicast

PIM-DM, PIM-SM, PIM-SSM, MSDP, MBGP, and Any-RP
IGMP V1/V2/V3 and IGMP V1/V2/V3 snooping
PIM6-DM, PIM6-SM, and PIM6-SSM
MLD V1/V2 and MLD V1/V2 snooping
Multicast policies and Multicast QoS

IRF

IRF2
Distributed device management, distributed link aggregation, and distributed resilient routing
Stacking through standard Ethernet interfaces
Local device stacking and remote device stacking

Security

Hierarchical user management and password protection
AAA authentication support
RADIUS authentication
HWTACACS
SSH2.0
Port isolation
802.1X authentication, centralized MAC authentication
Port security
IP Source Guard
HTTPs Hierarchical user management and password protection
802.1X authentication and centralized MAC address authentication
Guest VLAN
Portal authentication
DHCP snooping
Dynamic ARP detection
BPDU guard and root guard
uRPF
IP/Port/MAC binding
Plaintext authentication and MD5 authentication for OSPF and RIPv2 packets
Public Key Infrastructure (PKI)

ACL/QoS

Standard and extended ACLs
Ingress and egress ACLs
VLAN ACLs
Global ACLs
Diff-Serv QoS
SP, WRR, SP+WRR, CBWFQ
Traffic shaping
Congestion avoidance
Priority marking and remarking
802.1p, TOS, DSCP, and EXP priority mapping

System Management

Loading and upgrading through XModem/FTP/TFTP
SNMP v1/v2/v3
sFlow
RMON
NTP clocks
Fault alarm and automatic fault recovery
System logs
Device status monitoring mechanism, including the CPU engine, backplane, chips and other key components

Network Management

Command line interface (CLI) configuration
Telnet remote configuration
Configuration via console port
SNMP v1/v2/v3
System log
Power, fan, temperature alarm

HA

1+1 redundancy for key components such as MPUs
1+1 redundancy for power modules
Passive backplane
Hot swapping for all components
Real-time data backup on active/standby MPUs
CPU protection
VRRP
Hot patching
Ethernet OAM (802.1ag and 802.3ah)
RRPP/ERPS
VCT
Smart-Link
ISSU

General

Thunderproof

Common mode: 2kV
Differential mode: 1kV

Fully loaded weight

64.5 kg (142.20 lb)

Gross Weight

90.5 kg (199.52 lb)

Product Dimensions

620 mm × 440 mm × 660 mm (24.41" × 17.32" × 25.98" )

Packaging Dimensions

870 mm × 790 mm × 870 mm (34.25" × 31.10" × 14.57")

Stránky o produkte:

https://www.dahuasecurity.com/ceen/products/All-Products/Transmission/Core-Switches/S8610